Subversion Repositories seema-scanner

function MSE = alignSubScansMarkers(calibrationFileName, alnFileName)

%ALIGNSUBSCANSMARKERS Determines an exact alignment of sub scans (scans

% from e.g. one revolution of the rotation stage). 

% The method searches for circular white markers of a specific diameter.

% White frames corresponding to each sub scan must be available.

% A coarse alignment in the form of an aln-file must be provided. 

%

% 2017 Jakob Wilm, DTU

initialAlign = readMeshLabALN(alnFileName);

calibration = readOpenCVXML(calibrationFileName);

% correct for Matlab 1-indexing in principle point coordinates

calibration.K0(1:2, 3) = calibration.K0(1:2, 3)+1;

calibration.K1(1:2, 3) = calibration.K1(1:2, 3)+1;

% full projection matrices in Matlab convention

P0 = transpose(calibration.K0*[eye(3) zeros(3,1)]);

P1 = transpose(calibration.K1*[calibration.R1 calibration.T1']);

% matlab cam params for undistortion

camParams0 = cameraParameters('IntrinsicMatrix', calibration.K0', 'RadialDistortion', calibration.k0([1 2 5]), 'TangentialDistortion', calibration.k0([3 4]));

camParams1 = cameraParameters('IntrinsicMatrix', calibration.K1', 'RadialDistortion', calibration.k1([1 2 5]), 'TangentialDistortion', calibration.k1([3 4]));

% matlab struct for triangulation

camStereoParams = stereoParameters(camParams0, camParams1, calibration.R1', calibration.T1');

nSubScans = length(initialAlign);

% 3D coordinates of markers in local camera frame

E = cell(nSubScans, 1);

% 3D coordinates of markers in global initial alignment

Eg = cell(size(E));

% find 3D markers coordinates 

for i=1:nSubScans

    % load point cloud

    pc = pcread(initialAlign(i).FileName);

    Q = pc.Location;

    idString = strsplit(initialAlign(i).FileName, {'.ply', '_'});

    idString = idString{end-1};

    % load white frames

    scanDir = strsplit(initialAlign(i).FileName, '/');

    scanDir = fullfile(scanDir{1:end-1});

    frame0 = imread(fullfile(scanDir, ['sequence_' idString], 'frames0_0.png'));

    frame1 = imread(fullfile(scanDir, ['sequence_' idString], 'frames1_0.png'));

    e0Coords = autoDetectMarkers(frame0, P0, Q);

    e1Coords = autoDetectMarkers(frame1, P1, Q);

    %e0Coords = manuallyDetectMarkers(frame0, P0, Q);

    %e1Coords = manuallyDetectMarkers(frame1, P1, Q);

    e0Coords = undistortPoints(e0Coords, camParams0);

    e1Coords = undistortPoints(e1Coords, camParams1);

    % match ellipse candidates between cameras based on projection

    E0 = projectOntoPointCloud(e0Coords, P0, Q);

    E1 = projectOntoPointCloud(e1Coords, P1, Q);

    matchedPairs = nan(size(E0, 1), 2);

    nMatchedPairs = 0;

    for j=1:size(E0, 1)

        % should use pdist2 instead..

        sqDists = sum((E1 - repmat(E0(j,:), size(E1, 1), 1)).^2, 2);

        [minSqDist, minSqDistIdx] = min(sqDists);

        if(minSqDist < 1^2)

            nMatchedPairs = nMatchedPairs + 1;

            matchedPairs(nMatchedPairs, :) = [j, minSqDistIdx];

        end

    end

    matchedPairs = matchedPairs(1:nMatchedPairs, :);

    % triangulate marker centers (lens correction has been performed)

    [E{i}, e] = triangulate(e0Coords(matchedPairs(:, 1),:), e1Coords(matchedPairs(:, 2),:), camStereoParams);

    E{i} = E{i}(e<1.0, :);

    % write point cloud with marker (debugging)

    pcDebug = pointCloud([pc.Location; E{i}], 'Color', [pc.Color; repmat([255, 0, 0], size(E{i}, 1), 1)]);

    pcwrite(pcDebug, 'pcDebug.ply');

    % bring markers into initial alignment

    [U,~,V] = svd(initialAlign(i).Rotation);

    Ri = U*V';

    Ti = initialAlign(i).Translation;

    Eg{i} = E{i}*Ri' + repmat(Ti', size(E{i}, 1), 1);

end

% show found markers in initial alignment

figure;

hold('on');

for i=1:nSubScans

    % fix Ri to be orthogonal

    [U,~,V] = svd(initialAlign(i).Rotation);

    Ri = U*V';

    % bring point cloud into initial alignment

    pc = pcread(initialAlign(i).FileName);

    tform = affine3d([Ri' [0;0;0]; initialAlign(i).Translation' 1]);

    pcg = pctransform(pc, tform);

    pcshow(pcg);

    xlabel('x');

    ylabel('y');

    zlabel('z');

    plot3(Eg{i}(:,1), Eg{i}(:,2), Eg{i}(:,3), '.', 'MarkerSize', 15);

    title('Initial Alignment');

end

% match markers between poses using initial alignment

Pg = {};

P = {};

for i=1:nSubScans

    for j=1:size(Eg{i}, 1)

        pg = Eg{i}(j,:);

        p = E{i}(j,:);

        matched = false;

        for k=1:size(Pg, 2)

            clusterCenter = mean(cat(1, Pg{:,k}), 1);

            if(sum((pg - clusterCenter).^2) < 3^2)

                % store in global frame

                Pg{i,k} = pg;

                % store in local frame

                P{i,k} = p;

                matched = true;

                break;

            end

        end

        % create new cluster

        if(not(matched))

            Pg{i,end+1} = pg;

            P{i,end+1} = p;

        end 

    end

end

% run optimization

alignment = groupwiseOrthogonalProcrustes(P, initialAlign);

% show found markers in optimized alignment

figure;

hold('on');

for i=1:nSubScans

    Ri = alignment(i).Rotation;

    Ti = alignment(i).Translation;

    Ea = E{i}*Ri' + repmat(Ti', size(E{i}, 1), 1);

    % bring point cloud into optimized alignment

    pc = pcread(initialAlign(i).FileName);

    tform = affine3d([Ri' [0;0;0]; initialAlign(i).Translation' 1]);

    pcg = pctransform(pc, tform);

    pcshow(pcg);

    xlabel('x');

    ylabel('y');

    zlabel('z');

    plot3(Ea(:,1), Ea(:,2), Ea(:,3), '.', 'MarkerSize', 15);

    title('Optimized Alignment');

end

% write to ALN file

for i=1:length(alignment)

    alignment(i).FileName = initialAlign(i).FileName;

end

writeMeshLabALN(alignment, strrep(alnFileName, '.aln', 'Optimized.aln'));

end

function e = autoDetectMarkers(frame, P, pointCloud)

    % create mask based on morphology

    bw = imbinarize(rgb2gray(frame));

    cc = bwconncomp(bw);

    rp = regionprops(cc, 'Area', 'Solidity', 'Eccentricity', 'Centroid');

    idx = ([rp.Area] > 100 & [rp.Area] < 1000 & [rp.Solidity] > 0.9);

    initialGuesses = cat(1, rp(idx).Centroid);

    [e, ~] = detectMarkersSubpix(frame, initialGuesses, P, pointCloud);

    figure; 

    imshow(frame);

        hold('on');

    plot(e(:,1), e(:,2), 'rx', 'MarkerSize', 15);

    drawnow;

end

function e = manuallyDetectMarkers(frame, P, pointCloud)

    e = [];

	%edges = edge(rgb2gray(frame), 'Canny', [0.08 0.1], 2);

    figure; 

    hold('on');

    imshow(frame);

    title('Close figure to end.');

    set(gcf, 'pointer', 'crosshair'); 

    set(gcf, 'WindowButtonDownFcn', @clickCallback);

    uiwait;

    function clickCallback(caller, ~)

        p = get(gca, 'CurrentPoint'); 

        p = p(1, 1:2);

        [el, ~] = detectMarkersSubpix(frame, p, P, pointCloud);

        e = [e; el(:, 1:2)];

        if(not(isempty(el)))

            figure(caller);

            hold('on');

            plot(el(1), el(2), 'rx', 'MarkerSize', 15);

        end

    end

end

function [e, conf] = detectMarkersSubpix(frame, initGuesses, P, Q)

    % create mask based on morphology

    bw = imbinarize(rgb2gray(frame));

    cc = bwconncomp(bw);

    labels = labelmatrix(cc);

    % project point cloud into image

    q = [Q ones(size(Q,1),1)]*P;

    q = q./[q(:,3) q(:,3) q(:,3)];

    e = zeros(size(initGuesses));

    conf = zeros(size(initGuesses, 1), 1);

    nMarkersFound = 0;

    for i=1:size(initGuesses, 1)

        labelId = labels(round(initGuesses(i,2)), round(initGuesses(i,1)));

        labelMask = (labels == labelId);

        labelMask = imdilate(labelMask, strel('disk', 3, 0));

        if(sum(sum(labelMask)) < 10 || sum(sum(labelMask)) > 1000)

            continue;

        end

        % determine 3D points that are part of the marker

        % note: we should probably undistort labelMask

        pointMask = false(size(q, 1), 1);

        for j=1:size(q,1)

            if(round(q(j,2)) > size(labelMask, 1) || round(q(j,1)) > size(labelMask, 2) || round(q(j,2)) < 1 || round(q(j,1)) < 1)

                continue;

            end

            if(labelMask(round(q(j,2)), round(q(j,1))))

                pointMask(j) = true;

            end

        end

        if(sum(pointMask)) < 10

            continue;

        end

        % project 3D points onto local plane

        [~, sc, ~] = pca(Q(pointMask, :));

        Qlocal = sc(:, 1:2);

        % synthetic marker in high res. space

        m = zeros(151, 151);

        [x, y] = meshgrid(1:151, 1:151);

        m((x(:)-76).^2 + (y(:)-76).^2 <= 50^2) = 1.0;

        % relation between marker space (px) and true marker/local plane(mm)

        % true marker diameter is 1.75mm

        mScale = 101/1.8; %px/mm

        mShift = 76; %px

        % build homography from image to marker space

        H = fitgeotrans(q(pointMask, 1:2), mScale*Qlocal+mShift,  'projective');

        % bring image of marker into marker space

        imMarkerSpace = imwarp(frame, H, 'OutputView', imref2d(size(m)));

        imMarkerSpace = rgb2gray(im2double(imMarkerSpace));

        %figure; imshowpair(imMarkerSpace, m);

        % perform image registration

        % might be better off using subpixel image correlation

        [opt, met] = imregconfig('multimodal');

        T = imregtform(m, imMarkerSpace, 'translation', opt, met, 'DisplayOptimization', true);

        rege = imwarp(m, T, 'OutputView', imref2d(size(m)));

        %figure; imshowpair(imMarkerSpace, rege);

        % measure of correlation

        confI = sum(sum(imMarkerSpace .* rege))/sqrt(sum(sum(imMarkerSpace) * sum(sum(rege))));

        if confI<0.4

            continue;

        end

        fprintf('Found marker with confidence: %f\n', confI);

        % transform marker space coordinates (76,76) to frame space

        el = T.transformPointsForward([76, 76]);

        el = H.transformPointsInverse(el);

        nMarkersFound = nMarkersFound+1;

        e(nMarkersFound,:) = el;

        conf(nMarkersFound) = confI;

    end

    e = e(1:nMarkersFound, :);

    conf = conf(1:nMarkersFound);

end

function E = projectOntoPointCloud(e, P, pointCloud)

    q = [pointCloud ones(size(pointCloud,1),1)]*P;

    q = q(:,1:2)./[q(:,3) q(:,3)];

    E = nan(size(e,1), 3);

    for i=1:size(e, 1)

        sqDists = sum((q - repmat(e(i,:), size(q, 1), 1)).^2, 2);

        [sqDistsSorted, sortIdx] = sort(sqDists);

        neighbors = (sqDistsSorted < 4.0^2);

        distsSorted = sqrt(sqDistsSorted(neighbors));

        invDistsSorted = 1.0/distsSorted;

        sortIdx = sortIdx(neighbors);

        nNeighbors = sum(neighbors);

        if(nNeighbors >= 2)

            E(i, :) = 0;

            for j=1:nNeighbors

                E(i, :) = E(i, :) + invDistsSorted(j)/sum(invDistsSorted) * pointCloud(sortIdx(j), :);

            end

        end

    end    

end