WebSVN – seema-scanner – Diff – /src/camera/CameraPointGrey.cpp


#include "CameraPointGrey.h"
#include <cstring>
 
//#include <sys/ioctl.h>
//#include <linux/usbdevice_fs.h>
 
void PrintError(FlyCapture2::Error error){
    error.PrintErrorTrace();
}
 
vector<CameraInfo> CameraPointGrey::getCameraList(){
    
    FlyCapture2::Error error;
 
    FlyCapture2::BusManager busManager;
    unsigned int numCameras;
    error = busManager.GetNumOfCameras(&numCameras);
 
    vector<CameraInfo> ret;
 
    if (error != FlyCapture2::PGRERROR_OK){
        PrintError(error);
        return ret;
    }
 
    for (unsigned int i=0; i < numCameras; i++){
        FlyCapture2::PGRGuid guid;
        error = busManager.GetCameraFromIndex(i, &guid);
        if (error != FlyCapture2::PGRERROR_OK)
            PrintError(error);
 
        // Connect to camera
        FlyCapture2::Camera cam;
        error = cam.Connect(&guid);
        if (error != FlyCapture2::PGRERROR_OK)
            PrintError( error );
 
        // Get camera information
        FlyCapture2::CameraInfo camInfo;
        error = cam.GetCameraInfo(&camInfo);
        if (error != FlyCapture2::PGRERROR_OK)
            PrintError( error );
 
        CameraInfo camera;
        camera.vendor = "Point Grey";
        camera.model = camInfo.modelName;
        camera.busID = camInfo.nodeNumber;
        camera.serialNumber = camInfo.serialNumber;
 
        ret.push_back(camera);
    }
 
    return ret;
}
 
CameraPointGrey::CameraPointGrey(unsigned int camNum, CameraTriggerMode triggerMode) : Camera(triggerMode){
 
//    // Reset USB bus
//    std::cout << "Resetting USB device %s\n";
//    int rc = ioctl(fd, USBDEVFS_RESET, 0);
//    if (rc < 0)
//        perror("Error in ioctl");
//    else
//        printf("Reset successful\n");
 
 
    FlyCapture2::Error error;
 
    // Connect to camera
    FlyCapture2::BusManager busManager;
 
    FlyCapture2::PGRGuid camGuid;
 
    busManager.GetCameraFromIndex(camNum, &camGuid);
    error = cam.Connect(&camGuid);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
//    // Configure DCAM video mode and frame rate
//    FlyCapture2::VideoMode videoMode = FlyCapture2::VIDEOMODE_1280x960Y8;
//    FlyCapture2::FrameRate frameRate = FlyCapture2::FRAMERATE_7_5;
//    error = cam.SetVideoModeAndFrameRate(videoMode, frameRate);
//    if (error != FlyCapture2::PGRERROR_OK)
//        PrintError(error);
 
    // Configure Format7 mode
    FlyCapture2::Format7ImageSettings format7Settings;
    format7Settings.mode = FlyCapture2::MODE_0;
    format7Settings.pixelFormat = FlyCapture2::PIXEL_FORMAT_RAW16;
    format7Settings.width = 3376;
    format7Settings.height = 2704;
    format7Settings.offsetX = 0;
    format7Settings.offsetY = 0;
 
    // Validate and set mode
    FlyCapture2::Format7PacketInfo packetInfo;
    bool valid;
    error = cam.ValidateFormat7Settings(&format7Settings, &valid, &packetInfo);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
    // packetsize configures maximum frame rate
    error = cam.SetFormat7Configuration(&format7Settings, packetInfo.recommendedBytesPerPacket);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    // Configure general
    FlyCapture2::FC2Config config;
    config.numBuffers = 5;
    config.grabTimeout = 1000; // retrieveBuffer() timeout in ms
    config.grabMode = FlyCapture2::DROP_FRAMES;
    config.isochBusSpeed = FlyCapture2::BUSSPEED_S_FASTEST;
    config.highPerformanceRetrieveBuffer = true;
    //config.asyncBusSpeed = FlyCapture2::BUSSPEED_S_FASTEST;
    error = cam.SetConfiguration(&config);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
 
    // Get the camera information
    FlyCapture2::CameraInfo camInfo;
    error = cam.GetCameraInfo(&camInfo);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    std::cout << camInfo.vendorName << "  " << camInfo.modelName << "  " << camInfo.serialNumber << std::endl;
 
    // Turn off auto settings
    FlyCapture2::Property property;
    property.type = FlyCapture2::AUTO_EXPOSURE;
    property.onOff = false;
    error = cam.SetProperty(&property);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    property.type = FlyCapture2::GAMMA;
    property.onOff = true;
    property.absControl = true;
    property.absValue = 1.0;
    error = cam.SetProperty(&property);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    // Set frame rate to 6 to be in sync with the projector's 60Hz refresh
    property.type = FlyCapture2::FRAME_RATE;
    property.onOff = true;
    property.absControl = true;
    property.autoManualMode = false;
    property.absValue = 6.0;
    error = cam.SetProperty(&property);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    // Set white balance to match LED projector
    property.type = FlyCapture2::WHITE_BALANCE;
    property.onOff = true;
    property.absControl = false;
    property.autoManualMode = false;
    property.valueA = 666; //red
    property.valueB = 777; //blue
    error = cam.SetProperty(&property);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    // Set reasonable default settings
    CameraSettings settings;
    //settings.shutter = 8.33;
    settings.shutter = 16.66;
    settings.gain = 0.0;
    this->setCameraSettings(settings);
 
    return;
}
 
CameraSettings CameraPointGrey::getCameraSettings(){
 
    FlyCapture2::Property property;
 
    // Get settings:
    CameraSettings settings;
 
    property.type = FlyCapture2::SHUTTER;
    cam.GetProperty(&property);
    settings.shutter = property.absValue;
 
    property.type = FlyCapture2::GAIN;
    cam.GetProperty(&property);
    settings.gain = property.absValue;
 
    return settings;
}
 
void CameraPointGrey::setCameraSettings(CameraSettings settings){
 
    FlyCapture2::Property property;
    property.onOff = true;
    property.absControl = true;
 
    property.type = FlyCapture2::SHUTTER;
    property.absValue = settings.shutter;
    cam.SetProperty(&property);
 
    property.type = FlyCapture2::GAIN;
    property.absValue = settings.gain;
    cam.SetProperty(&property);
 
}
 
void CameraPointGrey::startCapture(){
 
    FlyCapture2::Error error;
 
    CameraSettings settings = this->getCameraSettings();
    std::cout << "\tShutter: " << settings.shutter << "ms" << std::endl;
    std::cout << "\tGain: " << settings.gain << "dB" << std::endl;
 
    if(triggerMode == triggerModeHardware){
        // Configure for hardware trigger
        FlyCapture2::TriggerMode triggerMode;
        triggerMode.onOff = true;
        triggerMode.polarity = 0;
        triggerMode.source = 0;
        triggerMode.mode = 14;
        error = cam.SetTriggerMode(&triggerMode);
        if (error != FlyCapture2::PGRERROR_OK)
            PrintError(error);
 
    } else if(triggerMode == triggerModeSoftware){
        // Configure software trigger
        FlyCapture2::TriggerMode triggerMode;
        triggerMode.onOff = true;
        triggerMode.polarity = 0;
        triggerMode.source = 7; // software
        triggerMode.mode = 0;
        error = cam.SetTriggerMode(&triggerMode);
        if (error != FlyCapture2::PGRERROR_OK)
            PrintError(error);
    }
 
    // Set the trigger timeout to 1000 ms
    FlyCapture2::FC2Config config;
    config.grabTimeout = 1000;
    error = cam.SetConfiguration(&config);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    error = cam.StartCapture();
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    capturing = true;
}
 
void CameraPointGrey::stopCapture(){
 
    FlyCapture2::Error error = cam.StopCapture();
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
    capturing = false;
}
 
void CameraPointGrey::trigger(){
 
    FlyCapture2::Error error;
 
    // Fire software trigger
    // broadcasting not supported on some platforms
    error = cam.FireSoftwareTrigger(false);
 
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
}
 
CameraFrame CameraPointGrey::getFrame(){
 
    FlyCapture2::Error error;
 
    // Retrieve the image
    FlyCapture2::Image rawImage;
    error = cam.RetrieveBuffer(&rawImage);
    if (error != FlyCapture2::PGRERROR_OK)
        PrintError(error);
 
//    rawImage.SetColorProcessing(FlyCapture2::IPP);
 
//    // de-Bayer
//    rawImage.Convert(FlyCapture2::PIXEL_FORMAT_RGB8, &currentImage);
 
//    CameraFrame frame;
 
//    frame.timeStamp = currentImage.GetTimeStamp().cycleCount;
//    frame.height = currentImage.GetRows();
//    frame.width = currentImage.GetCols();
//    frame.bitDepth = 8;
//    frame.channels = 3;
//    frame.memory = (unsigned short*)currentImage.GetData();
 
    CameraFrame frame;
 
    frame.timeStamp = rawImage.GetTimeStamp().cycleCount;
    frame.height = rawImage.GetRows();
    frame.width = rawImage.GetCols();
    frame.bitDepth = 8;
    frame.channels = 1;
    frame.memory = (unsigned short*)rawImage.GetData();
 
    return frame;
}
 
 
size_t CameraPointGrey::getFrameSizeBytes(){
    
    FlyCapture2::Format7ImageSettings format7Settings;
    cam.GetFormat7Configuration(&format7Settings, NULL, NULL);
 
    return format7Settings.height*format7Settings.width*3;
}
 
size_t CameraPointGrey::getFrameWidth(){
 
    FlyCapture2::Format7ImageSettings format7Settings;
    cam.GetFormat7Configuration(&format7Settings, NULL, NULL);
 
    return format7Settings.width;
}
 
size_t CameraPointGrey::getFrameHeight(){
 
    FlyCapture2::Format7ImageSettings format7Settings;
    cam.GetFormat7Configuration(&format7Settings, NULL, NULL);
 
    return format7Settings.height;
 
}
 
 
CameraPointGrey::~CameraPointGrey(){
 
    if(capturing){
        // Stop camera transmission
        stopCapture();
    }
 
    // Gracefulle destruct the camera
    cam.Disconnect();
 
    std::cout << "Closed camera!" << std::endl << std::flush;
}
 
 
 
 

Rev 110	Rev 113
1	`#include "CameraPointGrey.h"`	1	`#include "CameraPointGrey.h"`
2	`#include <cstring>`	2	`#include <cstring>`
3		3
4	`//#include <sys/ioctl.h>`	4	`//#include <sys/ioctl.h>`
5	`//#include <linux/usbdevice_fs.h>`	5	`//#include <linux/usbdevice_fs.h>`
6		6
7	`void PrintError(FlyCapture2::Error error){`	7	`void PrintError(FlyCapture2::Error error){`
8	`error.PrintErrorTrace();`	8	`error.PrintErrorTrace();`
9	`}`	9	`}`
10		10
11	`vector<CameraInfo> CameraPointGrey::getCameraList(){`	11	`vector<CameraInfo> CameraPointGrey::getCameraList(){`
12		12
13	`FlyCapture2::Error error;`	13	`FlyCapture2::Error error;`
14		14
15	`FlyCapture2::BusManager busManager;`	15	`FlyCapture2::BusManager busManager;`
16	`unsigned int numCameras;`	16	`unsigned int numCameras;`
17	`error = busManager.GetNumOfCameras(&numCameras);`	17	`error = busManager.GetNumOfCameras(&numCameras);`
18		18
19	`vector<CameraInfo> ret;`	19	`vector<CameraInfo> ret;`
20		20
21	`if (error != FlyCapture2::PGRERROR_OK){`	21	`if (error != FlyCapture2::PGRERROR_OK){`
22	`PrintError(error);`	22	`PrintError(error);`
23	`return ret;`	23	`return ret;`
24	`}`	24	`}`
25		25
26	`for (unsigned int i=0; i < numCameras; i++){`	26	`for (unsigned int i=0; i < numCameras; i++){`
27	`FlyCapture2::PGRGuid guid;`	27	`FlyCapture2::PGRGuid guid;`
28	`error = busManager.GetCameraFromIndex(i, &guid);`	28	`error = busManager.GetCameraFromIndex(i, &guid);`
29	`if (error != FlyCapture2::PGRERROR_OK)`	29	`if (error != FlyCapture2::PGRERROR_OK)`
30	`PrintError(error);`	30	`PrintError(error);`
31		31
32	`// Connect to camera`	32	`// Connect to camera`
33	`FlyCapture2::Camera cam;`	33	`FlyCapture2::Camera cam;`
34	`error = cam.Connect(&guid);`	34	`error = cam.Connect(&guid);`
35	`if (error != FlyCapture2::PGRERROR_OK)`	35	`if (error != FlyCapture2::PGRERROR_OK)`
36	`PrintError( error );`	36	`PrintError( error );`
37		37
38	`// Get camera information`	38	`// Get camera information`
39	`FlyCapture2::CameraInfo camInfo;`	39	`FlyCapture2::CameraInfo camInfo;`
40	`error = cam.GetCameraInfo(&camInfo);`	40	`error = cam.GetCameraInfo(&camInfo);`
41	`if (error != FlyCapture2::PGRERROR_OK)`	41	`if (error != FlyCapture2::PGRERROR_OK)`
42	`PrintError( error );`	42	`PrintError( error );`
43		43
44	`CameraInfo camera;`	44	`CameraInfo camera;`
45	`camera.vendor = "Point Grey";`	45	`camera.vendor = "Point Grey";`
46	`camera.model = camInfo.modelName;`	46	`camera.model = camInfo.modelName;`
47	`camera.busID = camInfo.nodeNumber;`	47	`camera.busID = camInfo.nodeNumber;`
48	`camera.serialNumber = camInfo.serialNumber;`	48	`camera.serialNumber = camInfo.serialNumber;`
49		49
50	`ret.push_back(camera);`	50	`ret.push_back(camera);`
51	`}`	51	`}`
52		52
53	`return ret;`	53	`return ret;`
54	`}`	54	`}`
55		55
56	`CameraPointGrey::CameraPointGrey(unsigned int camNum, CameraTriggerMode triggerMode) : Camera(triggerMode){`	56	`CameraPointGrey::CameraPointGrey(unsigned int camNum, CameraTriggerMode triggerMode) : Camera(triggerMode){`
57		57
58	`// // Reset USB bus`	58	`// // Reset USB bus`
59	`// std::cout << "Resetting USB device %s\n";`	59	`// std::cout << "Resetting USB device %s\n";`
60	`// int rc = ioctl(fd, USBDEVFS_RESET, 0);`	60	`// int rc = ioctl(fd, USBDEVFS_RESET, 0);`
61	`// if (rc < 0)`	61	`// if (rc < 0)`
62	`// perror("Error in ioctl");`	62	`// perror("Error in ioctl");`
63	`// else`	63	`// else`
64	`// printf("Reset successful\n");`	64	`// printf("Reset successful\n");`
65		65
66		66
67	`FlyCapture2::Error error;`	67	`FlyCapture2::Error error;`
68		68
69	`// Connect to camera`	69	`// Connect to camera`
70	`FlyCapture2::BusManager busManager;`	70	`FlyCapture2::BusManager busManager;`
71		71
72	`FlyCapture2::PGRGuid camGuid;`	72	`FlyCapture2::PGRGuid camGuid;`
73		73
74	`busManager.GetCameraFromIndex(camNum, &camGuid);`	74	`busManager.GetCameraFromIndex(camNum, &camGuid);`
75	`error = cam.Connect(&camGuid);`	75	`error = cam.Connect(&camGuid);`
76	`if (error != FlyCapture2::PGRERROR_OK)`	76	`if (error != FlyCapture2::PGRERROR_OK)`
77	`PrintError(error);`	77	`PrintError(error);`
78		78
79	`// // Configure DCAM video mode and frame rate`	79	`// // Configure DCAM video mode and frame rate`
80	`// FlyCapture2::VideoMode videoMode = FlyCapture2::VIDEOMODE_1280x960Y8;`	80	`// FlyCapture2::VideoMode videoMode = FlyCapture2::VIDEOMODE_1280x960Y8;`
81	`// FlyCapture2::FrameRate frameRate = FlyCapture2::FRAMERATE_7_5;`	81	`// FlyCapture2::FrameRate frameRate = FlyCapture2::FRAMERATE_7_5;`
82	`// error = cam.SetVideoModeAndFrameRate(videoMode, frameRate);`	82	`// error = cam.SetVideoModeAndFrameRate(videoMode, frameRate);`
83	`// if (error != FlyCapture2::PGRERROR_OK)`	83	`// if (error != FlyCapture2::PGRERROR_OK)`
84	`// PrintError(error);`	84	`// PrintError(error);`
85		85
86	`// Configure Format7 mode`	86	`// Configure Format7 mode`
87	`FlyCapture2::Format7ImageSettings format7Settings;`	87	`FlyCapture2::Format7ImageSettings format7Settings;`
88	`format7Settings.mode = FlyCapture2::MODE_0;`	88	`format7Settings.mode = FlyCapture2::MODE_0;`
89	`format7Settings.pixelFormat = FlyCapture2::PIXEL_FORMAT_RAW16;`	89	`format7Settings.pixelFormat = FlyCapture2::PIXEL_FORMAT_RAW16;`
90	`format7Settings.width = 3376;`	90	`format7Settings.width = 3376;`
91	`format7Settings.height = 2704;`	91	`format7Settings.height = 2704;`
92	`format7Settings.offsetX = 0;`	92	`format7Settings.offsetX = 0;`
93	`format7Settings.offsetY = 0;`	93	`format7Settings.offsetY = 0;`
94		94
95	`// Validate and set mode`	95	`// Validate and set mode`
96	`FlyCapture2::Format7PacketInfo packetInfo;`	96	`FlyCapture2::Format7PacketInfo packetInfo;`
97	`bool valid;`	97	`bool valid;`
98	`error = cam.ValidateFormat7Settings(&format7Settings, &valid, &packetInfo);`	98	`error = cam.ValidateFormat7Settings(&format7Settings, &valid, &packetInfo);`
99	`if (error != FlyCapture2::PGRERROR_OK)`	99	`if (error != FlyCapture2::PGRERROR_OK)`
100	`PrintError(error);`	100	`PrintError(error);`
101	`// packetsize configures maximum frame rate`	101	`// packetsize configures maximum frame rate`
102	`error = cam.SetFormat7Configuration(&format7Settings, packetInfo.recommendedBytesPerPacket);`	102	`error = cam.SetFormat7Configuration(&format7Settings, packetInfo.recommendedBytesPerPacket);`
103	`if (error != FlyCapture2::PGRERROR_OK)`	103	`if (error != FlyCapture2::PGRERROR_OK)`
104	`PrintError(error);`	104	`PrintError(error);`
105		105
106	`// Configure general`	106	`// Configure general`
107	`FlyCapture2::FC2Config config;`	107	`FlyCapture2::FC2Config config;`
108	`config.numBuffers = 5;`	108	`config.numBuffers = 5;`
109	`config.grabTimeout = 1000; // retrieveBuffer() timeout in ms`	109	`config.grabTimeout = 1000; // retrieveBuffer() timeout in ms`
110	`config.grabMode = FlyCapture2::DROP_FRAMES;`	110	`config.grabMode = FlyCapture2::DROP_FRAMES;`
111	`config.isochBusSpeed = FlyCapture2::BUSSPEED_S_FASTEST;`	111	`config.isochBusSpeed = FlyCapture2::BUSSPEED_S_FASTEST;`
112	`config.highPerformanceRetrieveBuffer = true;`	112	`config.highPerformanceRetrieveBuffer = true;`
113	`//config.asyncBusSpeed = FlyCapture2::BUSSPEED_S_FASTEST;`	113	`//config.asyncBusSpeed = FlyCapture2::BUSSPEED_S_FASTEST;`
114	`error = cam.SetConfiguration(&config);`	114	`error = cam.SetConfiguration(&config);`
115	`if (error != FlyCapture2::PGRERROR_OK)`	115	`if (error != FlyCapture2::PGRERROR_OK)`
116	`PrintError(error);`	116	`PrintError(error);`
117		117
118		118
119	`// Get the camera information`	119	`// Get the camera information`
120	`FlyCapture2::CameraInfo camInfo;`	120	`FlyCapture2::CameraInfo camInfo;`
121	`error = cam.GetCameraInfo(&camInfo);`	121	`error = cam.GetCameraInfo(&camInfo);`
122	`if (error != FlyCapture2::PGRERROR_OK)`	122	`if (error != FlyCapture2::PGRERROR_OK)`
123	`PrintError(error);`	123	`PrintError(error);`
124		124
125	`std::cout << camInfo.vendorName << " " << camInfo.modelName << " " << camInfo.serialNumber << std::endl;`	125	`std::cout << camInfo.vendorName << " " << camInfo.modelName << " " << camInfo.serialNumber << std::endl;`
126		126
127	`// Turn off auto settings`	127	`// Turn off auto settings`
128	`FlyCapture2::Property property;`	128	`FlyCapture2::Property property;`
129	`property.type = FlyCapture2::AUTO_EXPOSURE;`	129	`property.type = FlyCapture2::AUTO_EXPOSURE;`
130	`property.onOff = false;`	130	`property.onOff = false;`
131	`error = cam.SetProperty(&property);`	131	`error = cam.SetProperty(&property);`
132	`if (error != FlyCapture2::PGRERROR_OK)`	132	`if (error != FlyCapture2::PGRERROR_OK)`
133	`PrintError(error);`	133	`PrintError(error);`
134		134
135	`property.type = FlyCapture2::GAMMA;`	135	`property.type = FlyCapture2::GAMMA;`
136	`property.onOff = true;`	136	`property.onOff = true;`
137	`property.absControl = true;`	137	`property.absControl = true;`
138	`property.absValue = 1.0;`	138	`property.absValue = 1.0;`
139	`error = cam.SetProperty(&property);`	139	`error = cam.SetProperty(&property);`
140	`if (error != FlyCapture2::PGRERROR_OK)`	140	`if (error != FlyCapture2::PGRERROR_OK)`
141	`PrintError(error);`	141	`PrintError(error);`
142		142
143	`// Set frame rate to 6 to be in sync with the projector's 60Hz refresh`	143	`// Set frame rate to 6 to be in sync with the projector's 60Hz refresh`
144	`property.type = FlyCapture2::FRAME_RATE;`	144	`property.type = FlyCapture2::FRAME_RATE;`
145	`property.onOff = true;`	145	`property.onOff = true;`
146	`property.absControl = true;`	146	`property.absControl = true;`
147	`property.autoManualMode = false;`	147	`property.autoManualMode = false;`
148	`property.absValue = 6.0;`	148	`property.absValue = 6.0;`
149	`error = cam.SetProperty(&property);`	149	`error = cam.SetProperty(&property);`
150	`if (error != FlyCapture2::PGRERROR_OK)`	150	`if (error != FlyCapture2::PGRERROR_OK)`
151	`PrintError(error);`	151	`PrintError(error);`
152		152
153	`// Set white balance to match LED projector`	153	`// Set white balance to match LED projector`
154	`property.type = FlyCapture2::WHITE_BALANCE;`	154	`property.type = FlyCapture2::WHITE_BALANCE;`
155	`property.onOff = true;`	155	`property.onOff = true;`
156	`property.absControl = false;`	156	`property.absControl = false;`
157	`property.autoManualMode = false;`	157	`property.autoManualMode = false;`
158	`property.valueA = 666; //red`	158	`property.valueA = 666; //red`
159	`property.valueB = 777; //blue`	159	`property.valueB = 777; //blue`
160	`error = cam.SetProperty(&property);`	160	`error = cam.SetProperty(&property);`
161	`if (error != FlyCapture2::PGRERROR_OK)`	161	`if (error != FlyCapture2::PGRERROR_OK)`
162	`PrintError(error);`	162	`PrintError(error);`
163		163
164	`// Set reasonable default settings`	164	`// Set reasonable default settings`
165	`CameraSettings settings;`	165	`CameraSettings settings;`
166	`//settings.shutter = 8.33;`	166	`//settings.shutter = 8.33;`
167	`settings.shutter = 16.66;`	167	`settings.shutter = 16.66;`
168	`settings.gain = 0.0;`	168	`settings.gain = 0.0;`
169	`this->setCameraSettings(settings);`	169	`this->setCameraSettings(settings);`
170		170
171	`return;`	171	`return;`
172	`}`	172	`}`
173		173
174	`CameraSettings CameraPointGrey::getCameraSettings(){`	174	`CameraSettings CameraPointGrey::getCameraSettings(){`
175		175
176	`FlyCapture2::Property property;`	176	`FlyCapture2::Property property;`
177		177
178	`// Get settings:`	178	`// Get settings:`
179	`CameraSettings settings;`	179	`CameraSettings settings;`
180		180
181	`property.type = FlyCapture2::SHUTTER;`	181	`property.type = FlyCapture2::SHUTTER;`
182	`cam.GetProperty(&property);`	182	`cam.GetProperty(&property);`
183	`settings.shutter = property.absValue;`	183	`settings.shutter = property.absValue;`
184		184
185	`property.type = FlyCapture2::GAIN;`	185	`property.type = FlyCapture2::GAIN;`
186	`cam.GetProperty(&property);`	186	`cam.GetProperty(&property);`
187	`settings.gain = property.absValue;`	187	`settings.gain = property.absValue;`
188		188
189	`return settings;`	189	`return settings;`
190	`}`	190	`}`
191		191
192	`void CameraPointGrey::setCameraSettings(CameraSettings settings){`	192	`void CameraPointGrey::setCameraSettings(CameraSettings settings){`
193		193
194	`FlyCapture2::Property property;`	194	`FlyCapture2::Property property;`
195	`property.onOff = true;`	195	`property.onOff = true;`
196	`property.absControl = true;`	196	`property.absControl = true;`
197		197
198	`property.type = FlyCapture2::SHUTTER;`	198	`property.type = FlyCapture2::SHUTTER;`
199	`property.absValue = settings.shutter;`	199	`property.absValue = settings.shutter;`
200	`cam.SetProperty(&property);`	200	`cam.SetProperty(&property);`
201		201
202	`property.type = FlyCapture2::GAIN;`	202	`property.type = FlyCapture2::GAIN;`
203	`property.absValue = settings.gain;`	203	`property.absValue = settings.gain;`
204	`cam.SetProperty(&property);`	204	`cam.SetProperty(&property);`
205		205
206	`}`	206	`}`
207		207
208	`void CameraPointGrey::startCapture(){`	208	`void CameraPointGrey::startCapture(){`
209		209
210	`FlyCapture2::Error error;`	210	`FlyCapture2::Error error;`
211		211
212	`CameraSettings settings = this->getCameraSettings();`	212	`CameraSettings settings = this->getCameraSettings();`
213	`std::cout << "\tShutter: " << settings.shutter << "ms" << std::endl;`	213	`std::cout << "\tShutter: " << settings.shutter << "ms" << std::endl;`
214	`std::cout << "\tGain: " << settings.gain << "dB" << std::endl;`	214	`std::cout << "\tGain: " << settings.gain << "dB" << std::endl;`
215		215
216	`if(triggerMode == triggerModeHardware){`	216	`if(triggerMode == triggerModeHardware){`
217	`// Configure for hardware trigger`	217	`// Configure for hardware trigger`
218	`FlyCapture2::TriggerMode triggerMode;`	218	`FlyCapture2::TriggerMode triggerMode;`
219	`triggerMode.onOff = true;`	219	`triggerMode.onOff = true;`
220	`triggerMode.polarity = 0;`	220	`triggerMode.polarity = 0;`
221	`triggerMode.source = 0;`	221	`triggerMode.source = 0;`
222	`triggerMode.mode = 14;`	222	`triggerMode.mode = 14;`
223	`error = cam.SetTriggerMode(&triggerMode);`	223	`error = cam.SetTriggerMode(&triggerMode);`
224	`if (error != FlyCapture2::PGRERROR_OK)`	224	`if (error != FlyCapture2::PGRERROR_OK)`
225	`PrintError(error);`	225	`PrintError(error);`
226		226
227	`} else if(triggerMode == triggerModeSoftware){`	227	`} else if(triggerMode == triggerModeSoftware){`
228	`// Configure software trigger`	228	`// Configure software trigger`
229	`FlyCapture2::TriggerMode triggerMode;`	229	`FlyCapture2::TriggerMode triggerMode;`
230	`triggerMode.onOff = true;`	230	`triggerMode.onOff = true;`
231	`triggerMode.polarity = 0;`	231	`triggerMode.polarity = 0;`
232	`triggerMode.source = 7; // software`	232	`triggerMode.source = 7; // software`
233	`triggerMode.mode = 0;`	233	`triggerMode.mode = 0;`
234	`error = cam.SetTriggerMode(&triggerMode);`	234	`error = cam.SetTriggerMode(&triggerMode);`
235	`if (error != FlyCapture2::PGRERROR_OK)`	235	`if (error != FlyCapture2::PGRERROR_OK)`
236	`PrintError(error);`	236	`PrintError(error);`
237	`}`	237	`}`
238		238
239	`// Set the trigger timeout to 1000 ms`	239	`// Set the trigger timeout to 1000 ms`
240	`FlyCapture2::FC2Config config;`	240	`FlyCapture2::FC2Config config;`
241	`config.grabTimeout = 1000;`	241	`config.grabTimeout = 1000;`
242	`error = cam.SetConfiguration(&config);`	242	`error = cam.SetConfiguration(&config);`
243	`if (error != FlyCapture2::PGRERROR_OK)`	243	`if (error != FlyCapture2::PGRERROR_OK)`
244	`PrintError(error);`	244	`PrintError(error);`
245		245
246	`error = cam.StartCapture();`	246	`error = cam.StartCapture();`
247	`if (error != FlyCapture2::PGRERROR_OK)`	247	`if (error != FlyCapture2::PGRERROR_OK)`
248	`PrintError(error);`	248	`PrintError(error);`
249		249
250	`capturing = true;`	250	`capturing = true;`
251	`}`	251	`}`
252		252
253	`void CameraPointGrey::stopCapture(){`	253	`void CameraPointGrey::stopCapture(){`
254		254
255	`FlyCapture2::Error error = cam.StopCapture();`	255	`FlyCapture2::Error error = cam.StopCapture();`
256	`if (error != FlyCapture2::PGRERROR_OK)`	256	`if (error != FlyCapture2::PGRERROR_OK)`
257	`PrintError(error);`	257	`PrintError(error);`
258		258
259	`capturing = false;`	259	`capturing = false;`
260	`}`	260	`}`
261		261
262	`void CameraPointGrey::trigger(){`	262	`void CameraPointGrey::trigger(){`
263		263
264	`FlyCapture2::Error error;`	264	`FlyCapture2::Error error;`
265		265
266	`// Fire software trigger`	266	`// Fire software trigger`
267	`// broadcasting not supported on some platforms`	267	`// broadcasting not supported on some platforms`
268	`error = cam.FireSoftwareTrigger(false);`	268	`error = cam.FireSoftwareTrigger(false);`
269		269
270	`if (error != FlyCapture2::PGRERROR_OK)`	270	`if (error != FlyCapture2::PGRERROR_OK)`
271	`PrintError(error);`	271	`PrintError(error);`
272		272
273	`}`	273	`}`
274		274
275	`CameraFrame CameraPointGrey::getFrame(){`	275	`CameraFrame CameraPointGrey::getFrame(){`
276		276
277	`FlyCapture2::Error error;`	277	`FlyCapture2::Error error;`
278		278
279	`// Retrieve the image`	279	`// Retrieve the image`
280	`FlyCapture2::Image rawImage;`	280	`FlyCapture2::Image rawImage;`
281	`error = cam.RetrieveBuffer(&rawImage);`	281	`error = cam.RetrieveBuffer(&rawImage);`
282	`if (error != FlyCapture2::PGRERROR_OK)`	282	`if (error != FlyCapture2::PGRERROR_OK)`
283	`PrintError(error);`	283	`PrintError(error);`
284		284
285	`rawImage.SetColorProcessing(FlyCapture2::IPP);`	285	`// rawImage.SetColorProcessing(FlyCapture2::IPP);`
286		286
287	`// de-Bayer`	287	`// // de-Bayer`
288	`rawImage.Convert(FlyCapture2::PIXEL_FORMAT_RGB8, &currentImage);`	288	`// rawImage.Convert(FlyCapture2::PIXEL_FORMAT_RGB8, &currentImage);`
-		289
-		290	`// CameraFrame frame;`
-		291
-		292	`// frame.timeStamp = currentImage.GetTimeStamp().cycleCount;`
-		293	`// frame.height = currentImage.GetRows();`
-		294	`// frame.width = currentImage.GetCols();`
-		295	`// frame.bitDepth = 8;`
-		296	`// frame.channels = 3;`
-		297	`// frame.memory = (unsigned short*)currentImage.GetData();`
289		298
290	`CameraFrame frame;`	299	`CameraFrame frame;`
291		300
292	`frame.timeStamp = currentImage.GetTimeStamp().cycleCount;`	301	`frame.timeStamp = rawImage.GetTimeStamp().cycleCount;`
293	`frame.height = currentImage.GetRows();`	302	`frame.height = rawImage.GetRows();`
294	`frame.width = currentImage.GetCols();`	303	`frame.width = rawImage.GetCols();`
295	`frame.bitDepth = 8;`	304	`frame.bitDepth = 8;`
296	`frame.channels = 3;`	305	`frame.channels = 1;`
297	`frame.memory = (unsigned short*)currentImage.GetData();`	306	`frame.memory = (unsigned short*)rawImage.GetData();`
298		307
299	`return frame;`	308	`return frame;`
300	`}`	309	`}`
301		310
302		311
303	`size_t CameraPointGrey::getFrameSizeBytes(){`	312	`size_t CameraPointGrey::getFrameSizeBytes(){`
304		313
305	`FlyCapture2::Format7ImageSettings format7Settings;`	314	`FlyCapture2::Format7ImageSettings format7Settings;`
306	`cam.GetFormat7Configuration(&format7Settings, NULL, NULL);`	315	`cam.GetFormat7Configuration(&format7Settings, NULL, NULL);`
307		316
308	`return format7Settings.heightformat7Settings.width3;`	317	`return format7Settings.heightformat7Settings.width3;`
309	`}`	318	`}`
310		319
311	`size_t CameraPointGrey::getFrameWidth(){`	320	`size_t CameraPointGrey::getFrameWidth(){`
312		321
313	`FlyCapture2::Format7ImageSettings format7Settings;`	322	`FlyCapture2::Format7ImageSettings format7Settings;`
314	`cam.GetFormat7Configuration(&format7Settings, NULL, NULL);`	323	`cam.GetFormat7Configuration(&format7Settings, NULL, NULL);`
315		324
316	`return format7Settings.width;`	325	`return format7Settings.width;`
317	`}`	326	`}`
318		327
319	`size_t CameraPointGrey::getFrameHeight(){`	328	`size_t CameraPointGrey::getFrameHeight(){`
320		329
321	`FlyCapture2::Format7ImageSettings format7Settings;`	330	`FlyCapture2::Format7ImageSettings format7Settings;`
322	`cam.GetFormat7Configuration(&format7Settings, NULL, NULL);`	331	`cam.GetFormat7Configuration(&format7Settings, NULL, NULL);`
323		332
324	`return format7Settings.height;`	333	`return format7Settings.height;`
325		334
326	`}`	335	`}`
327		336
328		337
329	`CameraPointGrey::~CameraPointGrey(){`	338	`CameraPointGrey::~CameraPointGrey(){`
330		339
331	`if(capturing){`	340	`if(capturing){`
332	`// Stop camera transmission`	341	`// Stop camera transmission`
333	`stopCapture();`	342	`stopCapture();`
334	`}`	343	`}`
335		344
336	`// Gracefulle destruct the camera`	345	`// Gracefulle destruct the camera`
337	`cam.Disconnect();`	346	`cam.Disconnect();`
338		347
339	`std::cout << "Closed camera!" << std::endl << std::flush;`	348	`std::cout << "Closed camera!" << std::endl << std::flush;`
340	`}`	349	`}`
341		350
342		351
343		352
344		353

Subversion Repositories seema-scanner

(root)/src/camera/CameraPointGrey.cpp – Rev 110 → 113